Discover our anti-slip floor coatings and anti-slip floor paints / hall marking paints for professionals, which ensure a safe, non-slip floor.
The high-quality indoor floor paint with fine quartz granules provides a grippy surface with slip resistance rating R10 (German standard DIN 51130), ideal for heavily used industrial floors. The slip-resistant floor paint is suitable for forklift traffic.
Benefits of R10 anti-slip floor paint
Discover our one-component indoor floor paint with fine quartz granules:
- Provides a grippy, non-slip surface
- Meets slip resistance rating R10 (DIN 51130)
- Ideal for concrete, asphalt, screed
- Suitable for forklift traffic
- Abrasion- and chemical-resistant
- High opacity and fast-drying
- Silicone-free
- Easy application with roller or brush
Application could not be simpler: just stir and apply with a paint roller to concrete, asphalt or screed. The paint dries quickly, has high opacity and is extremely resistant and long-lasting. It is silicone-free and largely resistant to oil, solvents and cleaning agents, which also makes it suitable for forklift traffic.
A 5-litre container covers approx. 20 m² (with the recommended 2 coats, depending on the floor condition). You can choose from five colours: white (RAL 9016), yellow (RAL 1003), silver grey (RAL 7001), blue (RAL 5017) and stone grey (RAL 7030).
For coated substrates such as epoxy floors, we recommend a compatibility test. To go with the floor paint, we optionally offer a 2K deep-penetrating primer. Rely on anti-slip hall marking paint for a safe, durable floor surfacethat meets your requirements.
Anti-slip floor coatings from R9 to R13
In addition, discover a comprehensive selection of anti-slip floor coatings / floor sealersthat ensure maximum safety. From robust thick-film epoxy coatings to special anti-slip paints – these products offer solutions for a wide range of requirements. The product range includes food-safe floor coatings for hygiene areas, slip-resistant marking paint for step edges, as well as slip-resistant asphalt paints for heavily used outdoor areas. With innovative formulas such as a two-component epoxy resin coating with pre-mixed aggregate for an easy-to-clean anti-slip finish or a special sealer for smooth concrete, this selection offers high-quality solutions for every need. Thanks to a wide range of options and colours (up to 190 RAL shades), including cold-curing coatings and fast-drying formulas, the right solution is available for every situation. Contact us – we will be happy to advise you on choosing a suitable product.
For example, the anti-slip coating for heavily used outdoor areas such as footpaths, car parks, vehicle areas and danger zones. It offers the following benefits:
- Pre-mixed aggregate for excellent slip resistance
- For concrete and asphalt
- Ideal for heavily used areas
- One coat is sufficient
- Available in the following colours: black, green, brick red, light grey, grey, blue and yellow
Frequently asked questions about anti-slip floor coatings
What slip resistance does an anti-slip floor coating achieve?
That depends on the system and the broadcast aggregate. Versions from R9 to R13 are possible. The rating applies only to the tested system; the test certificate is available on request.
How is the substrate prepared?
The floor must be load-bearing, clean, dry and free of oil, wax and loose particles. Depending on the system, it is ground or blasted. Preparation is crucial for adhesion.
Is a rough coating still easy to clean?
More slip resistance usually means a rougher surface and a little more cleaning effort. Choose the grit to suit the hazard and adapt the cleaning method accordingly.
When is a coating better than mats or strips?
For large areas, forklift traffic and permanent walkways. For individual steps or small hazard points, strips, sheets or profiles are often quicker to implement.
Related solutions and industries
- Retrofitting industrial floors to make them non-slip
- Making car parks non-slip
- Securing loading docks with anti-slip coating
- Slip-resistant floors in the food industry
- Slip resistance R9 to R13 and standards
- Slip protection for sewage treatment plants and waterworks
Further information: DGUV Information 208-041: Assessment of slip hazards under operating conditions