Anti-Slip Mats & Anti-Fatigue Mats for Workplaces, Workshops and Industry

Ask the AI anti-slip advisor

Slip resistance classes, formats, surfaces and how to enquire. Around the clock.

How it works: from enquiry to delivery →Your input, photos and files are sent to Anthropic (Claude) and OpenAI (ChatGPT) in the USA to answer your question; according to the providers, API data is not used for training. Please do not enter personal or confidential data.

Anti-slip matting for safe, comfortable workstations – anti-fatigue and hard-wearing non-slip mats in standard sizes

Selection

Which anti-slip mat for which application?

A slip-resistant mat must suit the floor, the type of contamination and the work being done. Here is how to find the right anti-slip mat for your workplace.

Anti-slip mat for kitchens

In commercial kitchens and at dishwashing lines, drainage and hygiene mats are the right choice: liquid drains away, the mat is easy to clean, and some versions are antimicrobial and autoclavable.

Anti-fatigue mat for standing and assembly workstations

Ergonomic PU workplace mats relieve strain on feet and back while remaining slip-resistant – also available as an ESD version for electronics manufacturing.

Wet and oily areas

Nitrile rubber is oil-resistant. Interlocking tiles with drainage holes keep the walking surface dry.

Long work lines

Linkable mats made of end and centre sections cover entire conveyor lines and production lines – with a yellow safety border.

Rolls and matting by the metre

Some mats are available on a roll. For entrances, rubber ring mats are available by the metre in the outdoor range.

Vehicles and load beds

For lorries, trailers and vans: anti-slip mats for load beds.

Further information: HSE – Slips and trips · HSE – Flooring

Anti-slip mats and anti-fatigue mats: finding the right workplace mat

An anti-slip mat provides secure footing wherever water, oil or grease gets onto the floor. An anti-fatigue mat also relieves strain on feet, legs and back during standing work. In commercial use, good workplace mats combine both: they are slip-resistant, ergonomic and built for continuous operation.

Anti-fatigue mat for standing workstations

At assembly lines, packing tables and machines, employees often stand for hours. An anti-fatigue mat for standing workstations made of polyurethane or nitrile rubber cushions every step. Linkable mats made of end and centre sections also cover long work lines, and a yellow safety border makes the edge visible.

ESD mat for electronics manufacturing

Electrostatic protected areas require a dissipative ESD mat. An ESD floor mat combines the ergonomics of a workplace mat with the controlled dissipation of static charge.

Workshop mat and rubber anti-slip mat

Workshops have to deal with oil, cooling lubricants and swarf. A workshop mat made of nitrile rubber is oil-resistant and does not swell. Interlocking tiles with drainage holes keep the walking surface dry, and even when contaminated, a rubber anti-slip mat remains slip-resistant.

Anti-slip mat for kitchens

In commercial kitchens and at dishwashing lines, drainage and hygiene mats have proven their worth: liquids drain away, the mats can be cleaned thoroughly, and some are treated with antimicrobial finishes or are autoclavable.

Anti-slip matting by the metre and on a roll

For large or irregularly shaped areas, we offer anti-slip matting by the metre or on a roll. We will state the available widths and lengths in our quotation. Suitable mats for entrances and outdoor areas can be found under outdoor anti-slip mats.

Enquiry

Send us the area of use, dimensions and quantity via our enquiry form. We will propose the right slip-resistant mat and provide price and delivery time.

Anti-slip matting gives workstations in industry, commercial kitchens, workshops and wet areas a slip-resistant, ergonomic standing surface – including anti-fatigue mats for jobs that involve standing for long periods. Our non-slip workstation mats deliver dependable grip underfoot and genuine relief for staff who stand for a whole shift.

Our anti-slip mats are designed to make slippery surfaces safe – in swimming pools, commercial kitchens and canteens, workshops, industrial plants and construction sites, or anywhere else where safety is the top priority. Made from high-quality materials with a robust construction, a non-slip rubber mat is a long-lasting, ergonomic solution for the workplace.

Anti-slip matting for construction sites
Anti-slip matting for construction sites and factory yards to mark out walkways

This versatile anti-slip matting is ideal for construction sites and factory premises. The lightweight mat provides a reliable non-slip surface and offers a number of further advantages:

The flexible material can be laid on uneven ground without losing effectiveness.

A diamond-pattern surface provides extra traction and safety.

Simple floor marking that is quick to lay and easy to remove again, helping you organise your work area.

The high-visibility yellow colour keeps walkways clearly visible, even in demanding environments.

Easy to clean with a pressure washer or hose for fast, effortless maintenance.

Supplied on long rolls for straightforward installation and adaptation to your requirements.

Can be loose-laid or bonded to the floor, depending on your needs.

The low profile reduces trip hazards and supports a safe working environment.

Available in a wide range of designs, sizes and colours, our anti-slip mats blend into any setting and offer a very high level of slip resistance. Whether you are looking for discreet, transparent mats or bold, colourful options – we have the right product for every requirement.

Perforated non-slip floor mat for workstations
Perforated anti-slip workstation mats

Our non-slip mats are easy to install and need very little maintenance. If required, you can trim them to size yourself. A non-slip rubber mat is also easy to clean and gives you a long-term safety solution with minimal effort.

Non-slip mats
Non-slip mats

Anti-fatigue mats and industrial anti-slip matting

Nitrile Workstation Mat – Slip-Resistant, Washable and Ergonomic for Industrial & Commercial Use

The nitrile workstation mat with anti-slip finish is the ideal solution for industrial and commercial standing workstations where safety, ergonomics and hygiene all matter. As an oil- and chemical-resistant anti-fatigue mat, it is particularly suited to wet areas, commercial kitchens, workshops and production halls.

Nitrile anti-fatigue mats for kitchens and workshops with drainage, washable and slip-resistant
Nitrile workstation mats with drainage, washable and slip-resistant

The open drainage design of the nitrile workstation mat lets liquids run away quickly, while the slip-resistant surface keeps its grip even when wet. The resilient nitrile structure reduces strain during long periods of standing and makes work noticeably more comfortable. The industrial mat is also washable and built for continuous use in demanding environments – an economical, durable solution for professional applications. Available sizes are 54 × 86 cm, 86 × 142 cm and 86 × 277 cm.

We also offer a dedicated non-slip cable mat, specially developed to cover loose cables, leads, charging cables and small hoses safely.

Invest in our anti-slip workstation matting in standard sizes to make workplaces safer and more ergonomic. Request your quote today.

Matching products

A selection from our range. We are happy to provide sizes, versions, prices and lead times on request.

Heavy-duty anti-fatigue mat, 22 mm

Heavy-duty anti-fatigue mat, 22 mm

Item no. DD-MA-4424

Extra-thick industrial workstation mat with a nitrile rubber surface and closed-cell foam core. Designed for harsh environments with slag, oil, grease or chemicals.

  • approx. 22 mm, nitrile rubber/foam core
  • Black or yellow border
  • ASTM C1028-96: static coefficient of friction dry 0.87 / wet 0.85

📄 Product data sheet (PDF, 314 KB)

Enquire about this product

Two-layer PU workstation mat

Two-layer PU workstation mat

Item no. DD-FM-SALAMANDER

Two-layer workstation mat in high-density polyurethane with an especially grippy surface, supplied on the roll with a closed base.

  • High-density polyurethane, two-layer
  • Especially grippy
  • Roll 91 × 2286 cm or approx. 91 × 61 / 91 × 152 cm

Enquire about this product

Ergonomic PU workstation mat with bubble profile

Ergonomic PU workstation mat with bubble profile

Item no. DD-ERG-IN

Ergonomic anti-fatigue standing mat in foamed polyurethane with a bubble-textured surface. Relieves feet, legs and back during long periods of standing; the moulded edges do not curl up.

  • Foamed PU, closed-cell surface
  • Approx. 14.5 mm thick
  • Reaction to fire Cfl-s1 (EN 13501-1)

Enquire about this product

Interlocking anti-fatigue mat with yellow border

Interlocking anti-fatigue mat with yellow border

Item no. DD-MA-44498

Modular anti-fatigue mat made up of end and centre sections for long work lines in manufacturing, logistics and workshops, including areas exposed to oil, grease or chemicals.

  • 19 mm, nitrile rubber with foam core
  • Extendable to any length, yellow-striped border
  • Certified slip-resistant by the NFSI

📄 Product data sheet (PDF, 338 KB)

Enquire about this product

Modular natural rubber mat

Modular natural rubber mat

Item no. DD-FM-PUMA

Modular natural rubber mat for assembly areas and inspection stations, available as starter, centre and end sections. An oil-resistant version with 25 % NBR is available.

  • Closed base, 90 × 60 or 120 × 90 cm
  • 120 × 90 cm size links up with centre and end sections
  • Oil-resistant version with 25 % NBR

Enquire about this product

Ergonomic PU workstation mat with bubble profile, ESD

Ergonomic PU workstation mat with bubble profile, ESD

Item no. DD-ERG-IN-ESD

Static-dissipative version of the bubble-profile PU workstation mat for electrostatic protected areas. Combines ergonomic relief with resistance to ground according to IEC 61340-4-1 for electronics manufacturing and laboratories.

  • ESD version, tested to IEC 61340-4-1
  • Foamed PU, approx. 14.5 mm
  • Suitable for cleanrooms (EN ISO 14644-1)

Enquire about this product

Drainage anti-fatigue mat

Drainage anti-fatigue mat

Item no. DD-MA-4586

Free-draining workstation mat for wet areas exposed to grease, oil or chemicals, such as commercial kitchens, food processing plants or hospital wash-up areas.

  • Closed-cell nitrile rubber, open drainage structure
  • Antimicrobial treatment, static-dissipative
  • Washable, autoclavable, dishwasher-safe

📄 Product data sheet (PDF, 571 KB)

Enquire about this product

Modular ergonomic industrial mat

Modular ergonomic industrial mat

Item no. DD-FM-LUCHS

Versatile ergonomic industrial mat, for example for assembly workstations; the starter section can be extended with centre and end sections.

  • Closed base, 78 × 71 cm
  • Starter, centre and end sections

Enquire about this product

Smooth PU workstation mat

Smooth PU workstation mat

Item no. DD-ERG-INS

Smooth, 11 mm thick PU workstation mat that makes frequent turning and trolley movements easier. For assembly, packing stations and checkouts; also available as an ESD version.

  • Smooth surface for turning movements
  • Approx. 11 mm thick
  • Optionally available as an ESD version

Enquire about this product

Antimicrobial anti-fatigue mat, autoclavable

Antimicrobial anti-fatigue mat, autoclavable

Item no. DD-MA-5594

Solid comfort mat in nitrile rubber with a permanent antimicrobial treatment that can be autoclaved and washed. Suitable for operating theatres, catering and machine workstations.

  • 13 mm, resistant to oil, grease and chemicals
  • Autoclavable and industrially washable
  • Suitable for welding areas according to the manufacturer

📄 Product data sheet (PDF, 289 KB)

Enquire about this product

Workstation mat with open structure

Workstation mat with open structure

Item no. DD-FM-PANDA

Simple open-structure workstation mat for industrial workplaces; starter, centre and end sections can be combined to cover longer areas.

  • Open structure, 153 × 91 cm
  • Starter, centre and end sections

Enquire about this product

Classic PU workstation mat, antistatic

Classic PU workstation mat, antistatic

Item no. DD-ERG-ST

Classic workstation mat in anthracite PU foam with a patented surface profile. Antistatic, can be produced seamlessly in special sizes and shapes, optionally with yellow warning edges.

  • Foamed PU, 15 mm
  • Antistatic, cleanroom class ISO 5
  • Optional yellow edges

Enquire about this product

PVC foam anti-fatigue mat

PVC foam anti-fatigue mat

Item no. DD-CB-FF010003

Two-layer workstation mat in PVC foam with a hard-wearing, textured top layer. Relieves strain during long periods of standing at production lines, packing stations and workbenches, and insulates against cold concrete floors.

  • Open-cell PVC foam, 12.5 mm
  • Bevelled edges, also available in black/yellow
  • Reaction to fire to BS EN 13501-1 Dfl-s1

Enquire about this product

Interlocking anti-fatigue tile with nitrile content

Interlocking anti-fatigue tile with nitrile content

Item no. DD-CB-SS010007

Interlocking rubber tiles with nitrile content for wet, oily work areas. Drainage holes carry liquids away; according to the manufacturer, the tiles also withstand welding spatter and swarf.

  • Rubber with 30 % nitrile, 18 mm
  • 22 mm drainage holes
  • Slip-tested to DIN 51130

Enquire about this product

Hygienic gel-foam anti-fatigue mat

Hygienic gel-foam anti-fatigue mat

Item no. DD-CB-HYS010002

Lightweight gel-foam mat with a closed-cell structure that neither liquids nor dirt can penetrate. Antibacterial, oil-resistant and steam-sterilisable – for food production, catering and hospitals.

  • Slip resistance R11 to DIN 51130
  • Antibacterial and mould-resistant
  • Reaction to fire BS EN 13501-1 Dfl-s1

Enquire about this product

Invisible mat anchoring system

Invisible mat anchoring system

Item no. DD-MA-RIB-LOCK

Self-adhesive anchor strip for the floor into which the ribs on the back of the mat lock. Stops mats from shifting – especially logo and entrance mats – and stays invisible beneath the mat.

  • Hold does not weaken even after many wash cycles (unlike hook-and-loop fasteners)
  • Quick to install, no added weight
  • For indoor use

Enquire about this product

Anti-slip matting: frequently asked questions

When does a perforated workstation mat make sense?

Perforated mats make sense wherever liquids or swarf collect: they drain through the mat and keep the standing surface drier. That makes them a good fit for wet or oily areas such as commercial kitchens and workshops.

Which mat is suitable where oil and grease are present?

Mats made from resistant materials such as nitrile rubber are the usual choice where oil, grease or cutting fluids are present. For versions with test documentation, we can confirm resistance to your specific media on request.

How do I avoid trip edges with floor mats?

Choose mats with a low profile, bevelled edges and a secure fit. If necessary, mats can be fixed in place or fitted with edge profiles. Check mats regularly for raised edges.

Is anti-slip matting available made to measure?

We supply mats in standard sizes, some also on the roll. We do not offer a cutting service – depending on the material, you can trim the mats to size yourself. Send us photos, dimensions and a short description of the operating conditions via the contact form, and we will suggest suitable versions.

Which anti-slip mat is suitable for kitchens?

For kitchens we recommend drainage or hygiene mats made of nitrile rubber or closed-cell material: grease and water drain away, and the mats can be cleaned thoroughly.

Are anti-slip mats available on a roll?

Yes, some workplace and entrance mats are available on a roll or by the metre. We will state the available widths and lengths in our quotation.

Do workplace mats slip on smooth floors?

Good mats have a slip-resistant underside. Where trolleys pass or mats are moved frequently, a mat anchoring system keeps them in place.